| 當前位置：首頁->方案設計 |
|
| MCP37231－200 200Msps 16位ADC模數轉換方案 |
|
|
| 文章來源： 更新時間：2014/12/9 9:59:00 |
在線咨詢： |
| |
Microchip公司的MCP37231/21-200是16位/14位200Msps ADC系列產品,每路內置了高階數字抽取濾波器,增益,和失調調整,以及分數延遲恢復.器件具有諧波失真修正和DAC噪音消除,SNR大于74dBFS,SFDR大于90dBFS,200Msps的功耗僅為490mW,主要用在通信基礎設施, 蜂窩基站,雷達,工業和消費類數據采集系統,掃描儀和手持儀器,超聲以及聲納圖像.本文介紹了MCP37231/21-200主要特性,框圖, ADC核框圖以及MCP37X3X-200 16位200 MSPS ADC VTLA評估板ADM00505主要特性,框圖,電路圖,材料清單和PCB元件布局圖.
The MCP37231/21-200 is Microchip’s baseline 16-/14-bit 200 Msps pipelined ADC family, featuring built-in high-order digital decimation filters, gain and offset adjustment per channel, and fractional delay recovery.
The MCP37D31/21-200 device family features a digital down-conversion and CW beamforming capability, in addition to the features offered by the MCP37231/21-200.All devices feature harmonic distortion correction and DAC noise cancellation that enable high-performance specifications with SNR of greater than 74 dBFS, and SFDR of greater than 90 dBFS.
These A/D converters exhibit industry leading lowpower performance with only 490 mW operation while using the LVDS interface at 200 Msps. This superior low-power operation coupled with high dynamic performance makes these devices ideal for various high-performance, high-speed data acquisition systems including communications equipment, radar and portable instrumentation.
The output decimation filter option improves SNR performance up to 93.5 dBFS with the 512x decimation setting. The digital down-conversion option in conjunction with the decimation and quadrature output options offer great flexibility in digital communication system design, including cellular base-stations and narrow-band communications. Gain, phase and DC offset can be adjusted independently for each input channel, allowing for simplified implementation of CW beamforming and ultrasound Doppler imaging applications.
These devices can have up to eight differential input channels through an input MUX. The sampling rate is up to 200 Msps when a single channel is used, or 25 Msps per channel when all 8-input channels are used.
The differential full-scale analog input range is programmable up to 2.975 VP-P. The ADC output data can be coded in two’s complement or offset binary representation, with or without the data randomizer option. The output data is available as full rate CMOS or double data rate (DDR) LVDS. Additionally, a serialized LVDS option is also available for the 16-bit octal-channel mode.
The device is available in a Pb-free VTLA-124 and TFBGA-121 packages. The device operates over the commercial temperature range of -40°C to +85°C.
MCP37231/21-200主要特性:
• Sample Rates:
- 200 Msps for single-channel mode
- 200 Msps/Number of channel used
• SNR with fIN = 15 MHz and -1 dBFS:
- >74 dBFS for 200 Msps
• SFDR with fIN = 15 MHz and -1 dBFS:
- >90 dBFS at 200 Msps
• Power Dissipation with LVDS Digital I/O:
- 490 mW for 200 Msps
• Power Dissipation with CMOS Digital I/O:
- 436 mW for 200 Msps, Output Clock = 100 MHz
• Power Dissipation Excluding Digital I/O:
- 390 mW for 200 Msps
• Power Saving Modes:
- 80 mW during Standby
- 33 mW during Shutdown
• Supply Voltage:
- Digital Section: 1.2V, 1.8V
- Analog Section: 1.2V, 1.8V
• Selectable Input Range: up to 2.975 VP-P
• Input Channel Bandwidth: 500 MHz
• Channel-to-Channel Crosstalk: >95 dB in Multi-Channel mode (Input = 15 MHz, -1 dBFS)
• Output Data Format:
- Parallel CMOS, DDR LVDS
- Serialized DDR LVDS (16-bit, octal-channel mode)
• Optional Output Data Randomizer
• Digital Signal Post-Processing (DSPP) Options:
- Decimation Filters for improved SNR
- Fractional Delay Recovery (FDR) for timedelay corrections in multi-channel operations (dual/octal-channel modes)
- Phase, Offset and Gain adjust of individual channels
- Digital Down-Conversion (DDC) with I/Q or fS/8 output (MCP37D31/21-200)
- Continuous Wave Beamforming for octalchannel mode (MCP37D31/21-200)
• Built-In ADC Linearity Calibration Algorithms:
- Harmonic Distortion Correction (HDC)
- DAC Noise Cancellation (DNC)
- Dynamic Element Matching (DEM)
- Flash Error Calibration
• Serial Peripheral Interface (SPI)
• Package Options:
- VTLA-124 (9 mm x 9 mm x 0.9 mm)
- TFBGA-121 (8 mm x 8 mm x 1.08 mm)
• No external reference decoupling capacitor required for TFBGA Package
• Industrial Temperature Range: -40℃ to +85℃
MCP37231/21-200典型應用:
• Communication Instruments
• Cellular Base Stations
• Radar
• Ultrasound and Sonar Imaging
• Scanners and Low-Power Portable Instruments
• Industrial and Consumer Data Acquisition System
圖1. MCP37231/21－200框圖
圖2. MCP37231/21-200 ADC核框圖
MCP37X3X-200 16位200 MSPS ADC VTLA評估板ADM00505
The MCP37X3X-200 16-Bit 200 Msps ADC VTLA Evaluation Board (ADM00505) is intended to demonstrate the performance of the MCP37X2X-200 and MCP37X3X-200 device families. This evaluation board is used together with:
• MCP37XXX High-Speed Pipeline ADC Data Capture Card (ADM00506)
• Pipeline ADC Utility Software
This chapter provides an overview of the MCP37X3X-200 16-Bit 200 Msps ADC VTLA Evaluation Kit and covers the following topics:
• What is the MCP37X3X-200 16-Bit 200 Msps ADC VTLA Evaluation Board (ADM00505)?
• What is the MCP37XXX High-Speed Pipeline ADC Data Capture Card (ADM00506)?
• What is the Pipeline ADC Utility Software?
• MCP37X3X-200 16-Bit 200 Msps ADC VTLA Evaluation Kit Requirements
This evaluation board supports the following Microchip high-speed ADC device families:
• The MCP37X2X-200/MCP37X3X-200, which is Microchip Technology Inc.’s baseline 14-/16-bit 200 Msps pipelined analog-to-digital converter (ADC) device family, featuring a built-in high-order digital decimation filter, gain and offset adjustment per channel, and fractional delay recovery.
• The MCP37D2X-200/MCP37D3X-200 device family, which features digital down-conversion and CW beamforming capability, in addition to the features offered by the baseline device family.
圖3. MCP37X3X-200 16位200 MSPS ADC VTLA評估板ADM00505外形圖
圖4.評估板和數據板連接圖
圖5.評估板ADM00505電路圖(1)
圖6.評估板ADM00505電路圖(2)
圖7.評估板ADM00505電路圖(3)
圖8.評估板ADM00505電路圖(4)
圖9.評估板ADM00505電路圖(5)
圖10.評估板ADM00505電路圖(6)
評估板ADM00505材料清單:
圖11.評估板ADM00505 PCB設計圖 |
| |
|
|
|
|
|
| |
|
| |
|
|
