當前位置:首頁->方案設計 |
|
LTM4623 3A μModule穩壓電源解決方案 |
|
|
文章來源: 更新時間:2015/1/30 10:00:00 |
在線咨詢: |
|
Linear公司的LTM4623是完整的3A開關模式超薄6.25mm × 6.25mm × 1.82mm LGA封裝 μModule穩壓電源,集成了開關控制器,功率FET,電感和支持元件,僅需要外接輸入和輸出陶瓷電容,輸入電壓4V到20V,輸出電壓從0.6V到5.5V,具有過壓,過流和超溫保護,主要用在通信,網絡,數據通信和工業設備,數據存儲單元和卡.本文介紹了LTM4623主要特性和簡化框圖,典型應用電路,以及演示板2171A-A主要指標,電路圖和材料清單.
The LTM®4623 is a complete 3A step-down switching mode μModule (micromodule) regulator in a tiny ultrathin 6.25mm × 6.25mm × 1.82mm LGA package. Included in the package are the switching controller, power FETs, inductor and support components. Operating over an input voltage range of 4V to 20V or 2.375V to 20V with an external bias supply, the LTM4623 supports an output voltage range of 0.6V to 5.5V, set by a single external resistor. Its high efficiency design delivers 3A continuous output current.
Only ceramic input and output capacitors are needed.
The LTM4623 supports selectable discontinuous mode operation and output voltage tracking for supply rail sequencing. Its high switching frequency and current mode control enable a very fast transient response to line and load changes without sacrificing stability.
Fault protection features include overvoltage, overcurrent and overtemperature protection.
LTM4623主要特性:
<2mm Height, Complete Solution in <1cm2 (Single-Sided PCB) or 0.5cm2 (Dual-Sided PCB)
Wide Input Voltage Range: 4V to 20V
Input Voltage Down to 2.375V with External Bias
0.6V to 5.5V Output Voltage
3A DC Output Current
±1.5% Maximum Total DC Output Voltage Error
Current Mode Control, Fast Transient Response
Low EMI EN55022 Class B Compliant
External Frequency Synchronization
Multiphase Operation with Current Sharing
Output Voltage Tracking
Selectable Discontinuous Mode
Power Good Indicator
Overvoltage, Overcurrent and Overtemperature Protection
Ultrathin 6.25mm × 6.25mm × 1.82mm LGA Package
LTM4623應用:
PCIe and Backside PCB Mounting
Telecom, Datacom, Networking and Industrial Equipment
Data Storage Rack Units and Cards
![](http://solution.eccn.com/uploads/solution/201501/20150129135001943.gif)
圖1. LTM4623簡化框圖
![](http://solution.eccn.com/uploads/solution/201501/20150129135001918.gif)
圖2. LTM4623 4Vin-20Vin兩相1.5V/6A輸出設計圖
![](http://solution.eccn.com/uploads/solution/201501/20150129135001850.gif)
圖3. LTM4623 4Vin-20Vin,1.2V和1.5V輸出協調跟蹤設計圖
演示板2171A-A
Demonstration circuit 2171A-A features the LTM®4623 μModule® regulator, a tiny low profile high performance step-down regulator. The LTM4623 has an operating input voltage range of 4V to 20V and is able to provide an output current of up to 3A. The output voltage is programmable from 0.6V to 5V. The LTM4623 is a complete DC/DC point of load regulator in a 6.25mm × 6.25mm × 1.82mm round pad LGA package requiring only a few input and output capacitors. Output voltage tracking is available through the TRACK/SS pin for supply rail sequencing. CLKIN, CLKOUT and PHMODE pins are available for clock synchronization and interleaving. The LTM4623 data sheet must be read in conjunction with this demo manual prior to working on or modifying demo circuit 2171A-A.
演示板2171A-A主要指標:
![](http://solution.eccn.com/uploads/solution/201501/20150129135001886.gif)
![](http://solution.eccn.com/uploads/solution/201501/20150129135001752.gif)
圖4. 演示板2171A-A外形圖
![](http://solution.eccn.com/uploads/solution/201501/20150129135001388.gif)
圖5. 演示板2171A-A測試連接圖
![](http://solution.eccn.com/uploads/solution/201501/20150129135002368.gif)
圖6. 演示板2171A-A電路圖
演示板2171A-A材料清單:
![](http://solution.eccn.com/uploads/solution/201501/20150129135002361.gif) |
|
|
|
|
|
|
|
|
|