| 當前位置：首頁->方案設計 |
|
| On Semi Rhythm SB3231 BTE 1.0助聽器參考設計 |
|
|
| 文章來源： 更新時間：2015/4/25 9:31:00 |
在線咨詢： |
| |
On Semi公司的Rhythm SB3231是可配置的DSP系統(tǒng),具有四路自適應反饋抵消的壓縮電路,自適應降噪和FrontWave®靜態(tài)方向性,I2C和SDA編程,模擬或數(shù)字音量控制,高質量200位音頻處理和高保真CODEC,大功率/高增益功能,16 kHz或8 kHz帶寬.本文介紹了Rhythm™ SB3231主要特性,框圖,測試電路圖, 典型可編程和調整應用電路圖,以及BTE 1.0助聽器參考設計主要特性和主要指標,BTE助聽器電路框圖和主要元件圖.
Rhythm™ SB3231 is a trimmer-configurable DSP system based on a four-channel compression circuit featuring Adaptive Feedback Cancellation, Adaptive Noise Reduction, and FrontWave® static directionality.
Based on a phase cancellation method, Rhythm SB3231’s adaptive feedback reduction algorithm provides added stable gain to enable extra gain and user comfort. It features rapid adjustment for dynamic feedback situations and resistance to tonal inputs. The FrontWave directional system utilizes a pair of microphones to create a fully customizable static polar pattern, such as bidirectional, cardiod, hyper-cardiod and super-cardiod.
In addition to these adaptive algorithms, Rhythm SB3231 also supports the following features: up to four channel WDRC, low-distortion compression limiting, cross fading between audio paths for click-free memory changes, eight-band graphic equalizer, eight configurable generic biquad filters, programming speed enhancements, in-channel squelch to attenuate microphone and circuit noise in quiet environments, optional peak clipping, flexible compression adjustments, volume control, rocker switch, noise generation for tinnitus treatment, and industry leading security features to avoid cloning and software piracy.
Software Support
ARK is a set of software building blocks that can help reduce the time it takes to develop hearing aid fitting software. ARKonline® is an efficient web-based tool for creating product libraries and keeping them organized.
Rhythm™ SB3231主要特性:
FrontWave Directionality
Adaptive noise reduction
Adaptive feedback cancellation
WDRC compression with choice of 1, 2 or 4 channels of compression
Auto telecoil with programmable delay
EVOKE Lite™ acoustic indicators
Noise generator for tinnitus treatment or in-situ audiometry
Frequency response shaping with graphic EQ
Trimmer compatibility - four three-terminal trimmers with configurable assignments of control parameters
I²C and SDA programming
Rocker switch support for memory change and/or volume control adjustment
Analog or digital volume control with programmable range
High quality 20-bit audio processing
High power/high gain capability
SOUNDFIT® fitting software
Configurable low battery indicator
8 biquadratic filters
16 kHz or 8 kHz bandwidth
4 fully configurable memories with audible memory change indicator
96 dB input dynamic range with HRX™ Headroom Extension
128-bit fingerprint security system and other security features to protect against device cloning and software piracy
High fidelity audio CODEC
Soft acoustic fade between memory changes
Drives zero-bias two-terminal receivers
E1 RoHS compliant hybrid
圖1. Rhythm SB3231框圖
圖2. Rhythm SB3231測試電路圖
圖3. Rhythm SB3231典型可編程應用電路圖
圖4. Rhythm SB3231典型調整應用電路圖
BTE 1.0助聽器參考設計
The BTE 1.0 Reference Design is a hardware reference design for a Behind-The-Ear (BTE) hearing aid using the Rhythm SB3231 preconfigured DSP system. It contains a single SB3231 device which enables implementation of a complete digital hearing aid with state-of-the-art features and specifications.
This reference design assumes that the BTE will be assembled using point-to-point wiring of the components.
Therefore, no description of a PCB design is given. A flex PCB implementation is a preferred component interconnect method for large production volumes, but is beyond the scope of this document.
The SB3231 design is supported by an extensive collection of design tools and documentation. This also details how ON Semiconductor ARK tools are used for the design and configuration of a new hearing aid.
The following steps outline the basic procedure used in this document for the design and assembly of a hearing aid:
1. Specify the requirements of the product which include the desired features and performance
2. Identify the components that will meet the requirements of the design
3. Create the mechanical drawings, schematics, and bill of materials for the design
4. Build a prototype model using the selected components
5. Model the acoustic performance of the device to determine the overall acoustic response
6. Program the device with the desired configuration
7. Calibrate the final assembly
8. Regulatory requirements for hearing instruments vary by country and region. Once the device has been assembled and tested, it will be necessary to submit the device for regulatory testing and approval before it can be sold as a hearing instrument.
圖5. BTE 1.0助聽器參考設計元件裝配圖
圖6. BTE助聽器元件圖
圖7. BTE 1.0助聽器參考設計主要元件圖
BTE 1.0助聽器參考設計主要特性:
• Programmable BTE instrument with four channels of WDRC compression
• 96 dB input dynamic range
• Compatible with SOUNDFIT_ fitting software
• Adaptive feedback cancellation
• Programmable crossover frequencies
• 4 hearing programs
• Adaptive noise reduction using dual microphones
• Noise generator for tinnitus masking
• Auto telecoil with programmable delay
• Programmable Volume control (VC)
• Pushbutton memory select
• Power−on Delay
• Battery compartment
• Ear hook
• Disposable battery: Size 13
• Programmable acoustic tone for low battery voltage
• Housing available in different colors
• RoHS compliant
BTE 1.0助聽器參考設計主要指標:
圖8.BTE助聽器電路框圖 |
| |
|
|
|
|
|
| |
|
| |
|
|
